PhidgetMotorControl HC

PhidgetMotorControl HC

45.50 KD

Control up to two DC motors with this controller. Monitors surges and overheating in the API and connects to a USB port.


In stock

  • Description
  • Reviews (0)
  • Features
  • Documents


Note: The 1064_1B is identical to the 1064_1, except that you have the option of whether you want to include the USB cable.

The PhidgetMotorControl HC allows you to control the angular velocity and acceleration of up to two high-current DC motors.

The 1064:

  • Provides bi-directional control to 2 DC motors
  • Requires external 6 to 15VDC Power Supply
  • USB port is isolated from the motor control outputs
  • Over voltage, over temperature, over current conditions are fed back to the API on the PC

Many variations of brushed DC motors exist: permanent magnet motors, electromagnet motors, coreless motors, linear motors… the PhidgetMotorController can be used with any of these.


There are no reviews yet.

Be the first to review “PhidgetMotorControl HC”

Controller Properties
API Object Name MotorControl
Motor Type DC Motor
Number of Motor Ports 2
Velocity Resolution 0.79 % Duty Cycle
Acceleration Resolution 1.9 % Duty Cycle/s
Acceleration Min 1.9 % Duty Cycle/s
Acceleration Max 1940 % Duty Cycle/s
Acceleration Time Min 52 ms
Acceleration Time Max 105 s
PWM Frequency Max 20 kHz
Board Properties
Controlled By USB (Mini-USB)
API Object Name DCMotor
Electrical Properties
Supply Voltage Min 6 V DC
Supply Voltage Max 15 V DC
Continuous Motor Current Max (per motor) 14 A
Surge Current Max (per motor) 32 A
Overcurrent Trigger (combined) 50 A
Current Consumption Max 100 mA
Current Consumption Min 15 mA
USB Speed Full Speed
Physical Properties
Recommended Wire Size 10 - 26 AWG
Operating Temperature Min 0 °C
Operating Temperature Max 70 °C