ESP32-S CAM
7.50 د.ك
In stock
Description
ESP32S Wifi Bluetooth combo module is an ultra-performance that is high ultra-low-power consumption Wi-Fi and Bluetooth wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S dual-core 448 KByte ROM | 520 KByte SRAM | 16 KByte SRAM in RTC | 802.11 b/g/n/e/I Wi-Fi | Bluetooth v4.2 BR | EDR & BLE | clocks & Times |peripheral Interfaces and security mechanism.
ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast programming that is on-line open source toolchains based on GCC for development support. It is designed for, loggers, video steaming for camera, Wi-Fi & Bluetooth enabled devices, Home automation, mesh network applications, wireless music system, face recognition’s, etc. This chip has a single GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra-low-power 40 nm technology. It is designed and optimized for the powerful performance that is best, RF performance, robustness, versatility, features, and reliability, for a wide variety of applications, and different power profiles.
you must add the below package to the Arduino repository
https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
Operating instructions march-2024
- download the esp32 boards
- Set the board as “DOIT ESP32 DEVKIT V1” and choose the COM port
- choose examble > esp32 > camera > camerawebserver
- uncomment the following line and comment all other lines
- remove the USB wire from the esp board
- press and hold the IO0 button
- plugin the USB cable
- remove your finger from the button
- upload the code and wait until successful
- remove the USB cable and insert it again
- you are good to go code uploaded and should work fine
repeat the steps from 4 to 9 for any new code
